Coming Soon! Pro Tools EuCon

I just got off the phone with Avid’s Mark Williams, Bobby Lombardi and Christi Dean, who read my Top 5 Questions about The New Avid Pro Tools HD Gear and wanted a chance to respond. They did hold their cards pretty close in response to some of the questions but it was a very positive and revealing call that put the products in a new light.

One of the best revelations discussed is the fact that “within months,” Pro Tools will be Eucon compatible. This is not too surprising since they bought Euphonix in the spring, but it seemed to happen pretty quickly. If you’re not up to speed on Eucon, it is a high-speed Ethernet protocol developed by Euphonix to allow a hardware control surface to directly communicate with a range of software applications. Having Pro Tools onboard with Eucon opens up a world of possibilities for all types of audio production including sound for picture, live and studio. This doesn’t mean that Pro Tools is an open platform as Nuendo and others, but it is certainly a big step in making their software work with a broader range of hardware.

Here’s the upshot of the conversation in regards to the original Top 5 Questions:

Q: Why not change the cards too?

 A: This is the question where Avid held their cards closest to their chest saying they were “not prepared to reveal any specific products or release dates for upgrades.” What they did say was that they are on the fast track with beta testers and dedicated to moving forward with product development. I would guess that these are Euphonix related, with Pro Tools Eucon compatibility being the first salvo.

Q: What about Sync HD?

A: The question in the original post was not necessarily an expectation, but an answer to those HD owners who may wonder about Sync HD. Avid verified what I said in the post, which is that Sync HD is getting a cosmetic upgrade only and there is no specific tech changes coming to this interface.

Q: Why doesn’t HEAT offer individual channel controls? 

A: The answer here provided by Bobby Lombardi was the back story that should have been told in the original release. The code was written from the ground up: This is not a rehash of Dave Hill’s Phoenix Plug-in. The intention was not to offer individual control but mimic a subtle console feel system wide, that can be toggled on or off per channel. Lombardi said it was more like Crane Song’s HEDD processor, which mimics the distortion characteristics of analog tape and triode and pentode tubes. I’ll get to play with it extensively very soon in the Esquire House studio I’ve been working on and let you know if Heat is Hot.

Q: Does Pro Tools 8.1 fix promised bugs? 

A: The bugs promised to be fixed by Pro Tools 8.0.5 (which is still coming and specific to legacy hardware)  are still being worked on. I know it sounds confusing that 8.0.5 and 8.1 can both be new, but 8.1 is specific to the HD IO/OMNI/Heat release. While we were talking, Lombardi tracked the specific problems I spoke about in my Top 3 Most Annoying Pro Tools 8 Bugs post and while he couldn’t promise they’d be fixed in 8.0.5, he said they were on the list and would be addressed soon.

Q: What about Euphonix?

A: Avid was once again tight-lipped about this most recent acquisition, but Lombardi’s enthusiasm about the future was palpable. I’ve got a feeling they “get it” in regards to the potential here and I’m honestly excited about what they’ve got up their sleeve.

I commend Avid for responding to my questions as it shows they are watching and care what their high-end users are thinking. My intention is not to be the gadfly, but to represent the average user who may feel they don’t have a voice and is often too busy making a living recording, editing and mixing great audio to comment. Speaking of which, if you’ve got a  minute, please write your comments below and let your voice be heard. You can also take part in our related poll at Mixonline which as of now is leaning positively in relation to the new gear.

Current Mix Poll Results:

Now that Avid and Apogee have released new products for Pro Tools HD, budget aside, how would you upgrade your system?

I’m an Apogee fan all the way and would consider the Symphony IO my first choice: 22%

The new Avid Pro Tools HD IO looks great and I would put my money on that product: 46%

My system is rock solid now so I’d take the money I’d spend and put it into other gear: 30%

Digg Syndication Syndication Google Syndication MyYahoo Syndication Reddit Syndication

Related Topics: TechTicker

One Comment to “Coming Soon! Pro Tools EuCon”

Leave a Comment

You must be logged in to post a comment:
Register Here or Log in Here.


September 2010
« Aug   Oct »

Your Account


Subscribe to RSS Feed

Subscribe to MyYahoo News Feed

Subscribe to Bloglines

Google Syndication

Fairlight Xynergi Media Production Centre

Mix The Wire, a virtual press conference offering postings of the latest gear and music news, direct from the source. Visit the Briefing Room for the latest press postings.